|
|
 |
| 76. Petri Dish
(Disposable) |
|
These transparent, ready to use, disposable Petri
Dishes are made of optical clear, non-toxic, Polystyrene.
These Petri Dishes packed individually in Polyethylene bags
sterlized by radiation.
Material :Polystyrene |
|
Code No. |
Particulars
|
Packing |
| ILW 6261 |
90mm Radiation Stz. |
460Pcs. |
| ILW 6262 |
60mm Radiation Stz. |
300Pcs. |
| ILW 6263 |
35mm Radiation Stz. |
500Pcs. |
| Top
 |
| 77. Rack for Petri
Dishes |
|
These Racks are clear acrylic construction with
polycarbonate posts.69101 has a capacity to hold 60 petri
dishes of 90 mm size while 69102 one can hold 56 petri dishes
of 60mm. These racks are very useful during inoculation,
incubation & Storage. Visibility from all sides enables
the culture to be seen & checked during incubation.
Material :Polymethyal Methacrylate/
Polycarbonate |
|
Code No. |
Particulars
|
Packing |
| ILW 6501 |
Rack for 90mm Petri Dishes |
2Pcs. |
| ILW 6502 |
Rack for 60mm Petri Dishes |
2Pcs. |
| Top
 |
|
This rack is an excellent lab apparatus compatible with
different sizes of tubes. Four sides of this rack can be used
for tubes of Ø30mm, Ø20mm, Ø17mm & Ø12mm.mm
Material :
Polypropylene |
|
Code No. |
Particulars
|
Packing |
| ILW 7051 |
Multi Rack |
6Pcs. |
|
 |
| 79. Nestler Cylinder Stand
|
|
This stand as the name suggests is used for keeping
nestler cylinders. Made of polypropylene, this stand is
available in two sizes, one for 50ml nestler cylinder &
other for 100ml, nestler cylinder.
Material :
Polypropylene |
|
Code No. |
Particulars
|
Packing |
| ILW 7161 |
50ml |
6Pcs. |
| ILW 7162 |
100ml |
6Pcs. |
| Top
 |
|
This autoclavable Stand is perhaps the most commonly
used Test Tube Stand in various laboratories. For better
visibility, this 6 place rack is end supported by 2 columns.
The top plate has 2 holes for holding 25mm dia test tubes,
four holes to hold 16mm dia tubes where as the base has
corresponding hemispherical well. It also has six vertical
pins fro drying tubes.
Another option available in this
section is a test tube stand in which all the holes in the top
plates can hold 25mm dia tubes.
Material
:Polypropylene |
|
Code No. |
Particulars
|
Packing |
| ILW 7261 |
16mm & 25mm Ø Tubes |
12Pcs. |
| ILW 7262 |
25mm Ø Tubes |
12Pcs. |
| Top
 |
| 81. Test
Tube Stand
(Round) |
|
A handy, little, space saver, this circular twelve
place Polypropylene Test Tube Stand has four 25mm dia holes
& eight 19mm dia holes in its top plate. The base has
matching hemispherical wells & 16 verticalpins for drying
tubes surrounded by a trough to catch drippings. This
autoclavable rack can be easily disassembled for cleaning
purpose.
Material
:Polypropylene |
|
Code No. |
Particulars
|
Packing |
| ILW 7263 |
19mm & 25mm Ø Tubes |
2Pcs. |
| Top
 |
| 82. Rack For Micro Centrifuge Tubes
|
|
Moulded in Polycarbonate, these autoclavable racks are
made for holding 1.5ml. micro centrifuge tubes. These racks
have a unique stacking feature which prevents movement in any
direction. The holes are numbered & lettered for easy
identification.
Material
:Polycarbonate |
|
Code No. |
Particulars
|
Packing |
| ILW 7264 |
24 Tubes |
4Pcs. |
| ILW 7265 |
48 Tubes |
4Pcs. |
| Top
 |
| 83. & 84. Test
Tube Stand
(3Tier) |
|
These ingenious racks with a 3-tier design provide
clear view of the tube contents & convenient insertion
& removal of tubes. The PC rack has transparent upper
& middle plates where as in PP racks, every part is
coloured & opaque. These autoclavable Racks can withstand
sub-freezing temperatures.
Material
:Polypropylene |
|
Code No. |
Particulars
|
Packing |
| ILW 7266 |
13mmX31Tubes |
2Pcs. |
| ILW 7267 |
16mmX31Tubes |
2Pcs. |
| ILW 7268 |
20mmX20Tubes |
2Pcs. |
| ILW 7269 |
25mmX12Tubes |
2Pcs. |
| ILW 7310 |
25mmX18Tubes |
2Pcs. |
| ILW 7311 |
32mmX12Tubes |
2Pcs. |
| ILW 7312 |
25mmX36Tubes |
2Pcs. |
| ILW 7313 |
13mmX18Tubes |
4Pcs. |
| ILW 7314 |
15mmX18Tubes |
4Pcs. |
| ILW 7315 |
18mmX12Tubes |
4Pcs. |
| ILW 7316 |
13mmX62Tubes |
2Pcs. |
| ILW 7317 |
16mmX62Tubes |
2Pcs. |
| ILW 7318 |
20mmX40Tubes |
2Pcs. |
| ILW 7319 |
13mmX48Tubes |
2Pcs. |
| ILW 7320 |
13mmX72Tubes |
2Pcs. |
|
 |
|
Material
:Polycarbonate |
|
Code No. |
Particulars
|
Packing |
| ILW 7471 |
13mmX31Tubes |
2Pcs. |
| ILW 7472 |
16mmX31Tubes |
2Pcs. |
| ILW 7473 |
20mmX20Tubes |
2Pcs. |
| ILW 7474 |
25mmX12Tubes |
2Pcs. |
| ILW 7475 |
13mmX62Tubes |
2Pcs. |
| ILW 7476 |
16mmX62Tubes |
2Pcs. |
| ILW 7477 |
20mmX40Tubes |
2Pcs. |
| ILW 7478 |
25mmX24Tubes |
2Pcs. |
| ILW 7479 |
25mmX18Tubes |
2Pcs. |
| ILW 7480 |
25mmX36Tubes |
2Pcs. |
| ILW 7481 |
32mmX12Tubes |
2Pcs. |
| Top
 |
| 85.Test Tube Stand (Wire
Pattern) |
|
An economical substitute for wire racks, here are these
submersible, autoclavable racks which are stackable when
empty. These are available in different colours and are made
of a special blend of Polypropylene that makes it sink in a
water bath and maintain their stability even in agitated
water. These space saving racks can easily be disassembled for
cleaning purpose. the base is in the form of a grid with
square openings and fold up sides and end bars that lock into
rack tops.
Material
:Polypropylene |
|
Code No. |
Particulars
|
Packing |
| ILW 7521 |
13mmX90Tubes |
6Pcs. |
| ILW 7523 |
16mmX60Tubes |
6Pcs. |
| ILW 7524 |
20mmX40Tubes |
6Pcs. |
| ILW 7525 |
25mmX24Tubes |
6Pcs. |
| Top
 |
| 86. Rack
For Micro Centrifuge
(Folding) |
|
These two-tier versatile racks, made of polypropylene,
are autoclavable & can be used dry, in water baths or in
freezers. These racks are provided with alpha numeric index for
easy sample identification. Racks are stack able even when
loaded and have purpose designed lable spaces on each side.
Material
:Polypropylene |
|
Code No. |
Particulars
|
Packing |
| ILW 7601 |
100 Places for 1.5ml MCT's |
6Pcs. |
| Top
 |
|
Lasany Test Tube Baskets are made of Polypropylene.
These autoclavable, unbreakable and non-corrosive Baskets are
ideal for rinsing & draining glassware. These are also
useful for storage of test tubes or culture tubes during
sterlization or incubation.
Material
:Polypropylene |
|
Code No. |
Particulars
|
Packing |
| ILW 7651 |
140X120X110mm |
6Pcs. |
| ILW 7652 |
160X160X160mm |
6Pcs. |
| Top
 |
|
As the name suggests, this basket with wide net like
structure on all sides prove really usefully for draining
different laboratory apparatus after washing them. Made of
polypropylene, this basket can be repeatedly autoclaved.
Material
:Polypropylene |
|
Code No. |
Particulars
|
Packing |
| ILW 7653 |
400X400X100mm |
6Pcs. |
| Top
 |
| 89. Pipette Stand
(Horizontal) |
|
This detachable Stand can hold 12 Pipettes, 6 on each
side, in a horizontal position. Moulded in Polypropylene, this
autoclavable stand has two sides which are attached to each
other with three metallic rods coated with Polypropylene. This
stand can be easily disassembbled for space saving
storage.
Material
:Polypropylene |
|
Code No. |
Particulars
|
Packing |
| ILW 7721 |
For 12 Pipettes |
6Pcs. |
| Top
 |
| 90. Pipette Stand
(Vertical) |
|
This is a stable, non-corrosive, detachable Stand which
can hold 28 pipettes with maximum dia 14mm. The heavy base
measures 225mm in diameter and a Polypropylene coated square
rod measuring 375mm in length is screwed into the base. The
top disc that can be fixed on the rod has holes for holding
pipettes while the lower one has pilot holes where the pipette
tips rest and liquids drain down to the base. These discs can
be adjusted on the rod according to the length of the pipette.
The arrows provided on the discs should be kept parallel to
ensure that corresponding holes are being centered.
Material
:Polypropylene |
|
Code No. |
Particulars
|
Packing |
| ILW 7722 |
For 28Pipettes |
1Pcs. |
| Top
|
