WSQ - 4, water distillation unit gives high quality distilled water having an output of 4 lit/hr with a power input of 3 KW. Bormax's unique features along with the safety provisions makes it an ideal equipment to obtain pure distilled water for use in general laboratories and in numerous other end uses.

Advantages :

• Silica Heater
• Gate valve to prevent water wastage
• Flow switch for boiler safety
• Teflon drain cock for easy maintenance
• High quality distillate
• Powder coated stand
• Safety built-in

Features :

• Silica Heater: The silica heater helps in easy cleaning of the boiler. The scaling formed can easily be rinsed and no damage is caused to the heating element.

• Inbuilt Safety panel: Consists of Gate valve and Flow Switch, which takes care of power supply failure and water supply failure. Hence the unit automatically shuts off in case of water or power supply failure.

• Efficient Condenser:The distilled output is cool ensured by a highly efficient borosilicate coiled condenser

• Screw thread connectors: All plumbing connections to the equipment including that to the Silica Heater are made via Screw thread connectors with silicon rubber 'o' ring, which helps in easy installation and avoids the danger of glassware breakage during assembly.
  

Specifications :

Parameters	Values
Output	4 lit/hr
Distilled water Quality	-
Conductivity(using raw water)	3.0-4.0 x 10-6S/cm
Conductivity(using treated water)	1.5-2.0 x 10-6S/cm
PH	5.5 - 6.0
Distillate Quality	Pyrogen free
Electrical Power	220/240 Volts, 50 - 60 Hz, Single Phase, 3 KW Silica heater
Cooling water reqd	1-2 lit/min
Min. Pr.	3 p.s.i
Dimensions (w x d x l)	600 x 185 x 480 (mm)
Weight	8 kgs (app)

Ordering & Packaging Information :

Catalogue No.	Bormax-WSQ 4
Description	Bormax water still
Spares	-
BSIC/BM-WSQ-4/B	Boiler
BSIC/BM-WSQ-4/SH	3 KW Silica Heater
BSIC/BM-WSQ-4/C	Condenser
BSIC/BM-WSQ-4/S	Powder Coated Stand
BSIC/BM-WSQ-4/H	Hose Kit
Packaging Information	7 ply carton with thermocole packing for glass
Dimensions	102 x 45.5 x 39 cm
Gross Weight	15 Kg

Note:

• The results mentioned in the specifications are obtained under standard laboratory conditions and by using water treatment cartridge for raw water.
• The use of treated water / soft water is highly recommended to prevent scaling in the boiler, to improve the quality of distillate and for longer life of the equipment.

The Easy-Still Mark-4 has an elegant design, is economical and efficient. It is available in attractive colours. The yield is 4 lit/hr with a power input of 3 KW by a chromium plated heater which is thermostatically protected against overheat. Features : Abundant Output Efficient Boiler & Condenser Heater Thermostatically Protected Easy and safe to use

Features :

• Abundant Output: The still provides 4 lit/hr of distilled water produced through a power input of 3 KW by a chromium plated heater housed in a horizontal borosilicate glass boiler.
• Efficient Boiler & CondenserThe Boiler and Condenser are designed for high efficiency and and provided with threading for easy plumbing of condenser. The distilled output is cool ensured by a highly efficient borosilicate coiled condenser. Temperature of distillate 25oC-40oC.
• Heater Thermostatically Protected:Heater is a 3 KW Chromium plated heater fitted with a thermostat for overheat protection.
• Powder coated stand The stand powder coated for long rust free operation.
• Easy and safe to useBoiler is provided with teflon screw cork for in-situ cleaning of the boiler.

Specifications :

Parameters	Values
Output	4 lit/hr
Distilled water Quality	-
Conductivity(using Raw Water)	3.0 - 4.0 X 10-6S/cm
Conductivity(using treated water)	1.5 - 2.0 X 10-6S/cm
PH	5.5 - 6.0
Distillate Quality	Pyrogen free
Electrical Power	220/240 Volts, 50 - 60 Hz, Single Phase, 3 KW Heater
Cooling water reqd (min.)	1 lit/min
Min. Pr.	3 p.s.i
Dimensions (w x d x l)	48cm x 17.5cm x 61cm (app.)
Weight	4.85 kgs (app.)

Ordering & Packaging Information :

Catalogue No.	BSIC/ES-4
Description	Easy-Still Mark-4
Spares	-
BSIC/ES/B4	Boiler
BSIC/ES/H3	3 KW Heater
BSIC/ES/C4	Condenser
Packaging Information	-
7 ply carton with thermocole packing for glass
Dimensions	74 x 52 x 37 cm
Gross Weight	12 Kg

Note:

• The results mentioned in the specifications are obtained under standard laboratory conditions and by using water treatment cartridge for raw water.
• The use of treated water / soft water is highly recommended to prevent scaling in the boiler, to improve the quality of distillate and for longer life of the equipment.

Pure Hit Stills are designed for reliable continuous operation incorporating a host of features unmatched by comparable stills. It is easy to use, safe to clean, thoroughly reliable and above all low cost. CE Approval from Canadian Standards Association for its Water Distillation Unit, Pure-Hit Still. Features : Abundant Output: The still provides 4 lit/hr of distilled water produced through a power input of 3 KW by a chromium plated heater housed in a horizontal borosilicate glass boiler. Efficient Boiler & Condenser:The Boiler and Condenser are designed for high efficiency and provided with threading for easy plumbing of condenser. The distilled output is cool ensured by a highly efficient borosilicate coiled condenser. Temperature of distillate 25-40 deg C. Heater Thermostatically Protected: Heater is a 3 KW Chromium plated heater fitted with a thermostat whcih shuts off automatically in case of water supply failure. Powder coated stand :The stand is zinc plated & powder coated for long rust free operation. Easy and safe to use:Boiler is provided with teflon screw cork for insitu cleaning of the boiler.

Specifications :

Parameters	Values
Output	4 lit/hr
Distilled water Quality	-
Conductivity(using raw water)	3.0 - 4.0 X 10-6S/cm
Conductivity(using treated water)	1.5 - 2.0 X 10-6S/cm
PH	5.5 - 6.0
Distillate Quality	Pyrogen free
Electrical Power	220/240 Volts, 50 - 60 Hz, Single Phase, 3 KW Heater
Cooling water reqd (min.)	1 lit/min
Min. Pr.	3 p.s.i
Dimensions (w x d x l)	50 x 15 x 45 (cm)
Weight	6 kgs (app)

Ordering & Packaging Information :

Note:

• The results mentioned in the specifications are obtained under standard laboratory conditions and by using water treatment cartridge for raw water.
• The use of treated water / soft water is highly recommended to prevent scaling in the boiler, to improve the quality of distillate and for longer life of the equipment.

The new improved Pure Hit Q Stills are made from Borosilicate glass (Pyrex glass) manufactured with a host of advanced safety features for Laboratory use.

Features : Abundant Output: The still provides 4 lit/hr of high quality distillate by a 3KW Silica heater housed in a horizontal borosilicate glass boiler. Distillate output is cool ensured by a high efficiency condenser. Dual overheat protection and safety with Pressure Temperature Switch (PTS) for Boiler and condenser. Level Sensor: For Automatic Operation and Reservoir level control. Additional provision for wall mounting. Silica sheathed heating element.

Specifications :

Easystill ES-Mark 4 XL provides high quality distilled water and incorporates several new & advanced safety features with additional wall mounting brackets.

Features: Gate valve to prevent water wastage

Flow switch for boiler safety

Thermostat for overheat protection

Fuse for safety

Built-in Safety controls

Abundant Output

Efficient Condenser

High quality distillate

Powder coated stand

Features :

Built-in Safety Controls The unit has built-in safety incorporating the latest features, such as,

• Gate Valve, which shuts off incase of power supply failure, thus preventing water wastage
• Flow switch, which is provided for boiler safety. It shuts off power supply to the heater, in case of water supply failure.
• Thermostat: The heater is provided with thermostat for overheat protection.
• Fuse is provided for safety in case of voltage fluctuations and short circuit.
• Additional On/Off switch with Water failure indicator lamp.

Pure Hit Still XL provides good quality distilled water for use in laboratories. It is designed for reliable continuous operation and it incorporates several new and advanced safety features

Built-in Safety Features:


• Gate valve to prevent water wastage
• Flow switch for boiler safety
• Thermostat for overheat protection
• Fuse for safety

Features :

• Built-in Safety Controls: The unit has built-in safety incorporating the latest features, such as,
  • Gate Valve, which shuts off incase of power supply failure, thus preventing water wastage
  • Flow switch, which is provided for boiler safety. It shuts off power supply to the heater, in case of water supply failure.
  • Thermostat: The heater is provided with thermostat for overheat protection.
  • Fuse is provided for safety in case of voltage fluctuations and short circuit.
  • Additional On/Off switch with Water failure indicator lamp.
• Abundant output: The still provides 4 lit/hr of distilled water produced through a power input of 3 KW by a chromium-plated heater, housed in a horizontal Glass boiler.
• Efficient Condenser: The distilled output is cool ensured by a high efficiency coiled condenser. Temp. of distillate is 25-400C tested at ambient room temperature of 300C
• High quality distillate: The distillate obtained is of high quality with low conductivity and is pyrogen free.
• Screw thread connectors are provided for easy plumbing and installation and to avoid the danger of glassware breakage during assembly
• Powder coated stand: For long, rust free operation.
• Teflon drain cock: For easy cleaning of the boiler.

Specifications :

Parameters	Values
Output	4 lit/hr
Distilled water Quality	Reagent Grade III
Conductivity(using raw water)	3.0-4.0 x 10-6S/cm
Conductivity(using treated water)	1.5-2.0 x 10-6S/cm
PH	5.5 - 6.0
Distillate Quality	Pyrogen free
Electrical Power	220/240 Volts, 50 - 60 Hz, Single Phase, 3 KW heater
Cooling water reqd	1-2 lit/min
Min. Pr.	3 p.s.i
Dimensions (w x d x l)	500 x 200 x 600 (mm)
Nett. Weight	6 kgs (app.)

Ordering & Packaging Information :

Catalogue No.	BASIC/PH4/XL
Description	Pure Hit Still XL
Spares	-
BSIC/PHS/XL/B	Boiler
BSIC/PHS/XL/H	3 KW Heater
BSIC/PHS/XL/C	Condenser
BSIC/PHS/XL/S	Powder Coated Stand
BSIC/PHS/XL/HK	Hose Kit
Packaging Information	-
Dimensions (7 ply carton)	740 x 520 x 370 (mm)
Gross Weight	14.5 Kg (app.)
Volume Weight	24 Kg (app.)

Note: The results mentioned in the specifications are obtained under standard laboratory conditions and by using water treatment cartridge for raw water.

The use of treated water / soft water is highly recommended to prevent scaling in the boiler, to improve the quality of distillate and for longer life of the equipment

Easy-Still Mark 2000 SDQ/DDQ XL PTS, single and double distillation units provide good quality distilled water with an output of 2.0 lit/hr. Easy-Still's unique features such as silica heater, PTS (Pressure-Temperature Switch), Teflon screw cock for boiler, and screw thread connectors, makes it an ideal, efficient and economical equipment to obtain pure distilled water for use in general laboratories and in numerous other end uses.

Special Safety Features:

• PTS for safety: The unit is provided with PTS(Pressure Temperature Switch) to shut off power supply in case the water level in the boiler falls below the heater level.
• Fuse:Fuse is provided for safety in case of high voltage and short circuit.

Features :

• Silica Heater:The silica heater helps in easy cleaning of the boiler. The scaling formed can easily be acid rinsed.
• Teflon screw cock:A Teflon screw cock is incorporated for in-situ cleaning and draining of the boiler
• Efficient Condenser:The distilled output is cool ensured by a highly efficient borosilicate coiled condenser. The temperature of the distillate is around 25 - 45oC.
• Screw thread connectors: All plumbing connections to the equipment including that to the Silica Heater are made via Screw thread connectors with silicon rubber 'O' ring, which helps in easy installation and avoids the danger of glassware breakage during assembly.
• Powder coated stand: The stand is powder coated for long rust free operation.
• Easy and safe to use.

Specifications :

Parameters	Values for SDQ	Values for DDQ
Output	2.0 lit/hr	2.0 lit/hr
Distilled water Quality	-	-
Conductivity (using raw water)	3.0 - 4.0 X 10-6S/cm	0.8 X 10-6S/cm
Conductivity (using treated water)	1.5 - 2.0 X 10-6S/cm	0.7 X 10-6S/cm
PH	5.5 - 6.0	Not applicable*
Distillate Quality	Pyrogen free	Pyrogen free
Electrical Power	220/240 Volts, 50 - 60 Hz, Single Phase, 1500 W Silica heater	220/240 Volts, 50 - 60 Hz, Single Phase, 2X1500 W Silica heater
Cooling water reqd	1-3 lit/min	2-4 lit/min
Min. Pr.	3 p.s.i	3 p.s.i
Dimensions (w x d x l)	250 x 180 x 450 (mm)	2(250 x 180 x 450) mm

Note:

• The results mentioned in the specifications are obtained under standard laboratory conditions and by using water treatment cartridge for raw water.
• The use of treated water / soft water is highly recommended to prevent scaling in the boiler, to improve the quality of distillate and for longer life of the equipment.
• The heater wattage and output has been designed for 240 V operation. Normally the voltage will be 220-230V. Hence there may be a 10% variation in the output capacity of the distiller.
• Warranty: 3 months against any manufacturing defects.
• * Due to difficulties associated with measuring PH for high purity water and the doubtful significance of the value obtained, PH is not specified for high purity water.

Ordering & Packaging Information :

The first All Quartz Double Distiller was introduced by us in the year 1980 for obtaining high purity water. Until then double distilled water was prepared by two seperate operations using conventional glass water still, requiring elaborate handling and often leading to contamination. The distillate obtained from glass double distiller could never be used with satisfactory results for analysis in experiments, where trace elements were to be determined in certain biochemical reactions where studies in enzymes have to be conducted. These disadvantages vanished with the introduction of All Quartz Double Distiller made from electronic grade transparent fused quartz.

Features :

• Quartz distiller, Demountable boiler.
• Compact design, Dual safety cutout(optional).
• High purity, low conductivity, Pyrogen free distillate.
• Easy service and maintenance due to Demountable model.
• Distillate is free of Heavy metals.

Advanced Safety Features of AQDD XL RSH with PTS:

• Replaceable Silica Heater: Eliminates frequent shut down of the equipment and is service free
• Quartz Teflon screw cock for in-situ cleaning and draining of the boiler
• Level sensor for automatic operation
• PTS (Pressure Temperature Switch) for equipment safety that shuts off the unit when the water level falls below the heater level.
• Gate valve to prevent cooling water wastage
• Flow switch for boiler safety.
• Redesigned unit with larger boiling space and wider condensing area

Mini-quartz distiller for water is compact and portable with a specially designed Quartz boiler and Quartz/Borosilicate condenser(optional). Quartz can withstand very high temperatures and it does not easily break on rapid heating and cooling. Quartz being highly resistant, thermally as well as chemically, gives high purity distillate.

Advantages :

• The distillate is pyrogen free, free of heavy metals and pollution free
• Instant distilled water flow. Switch on time is less than a minute
• Quartz boiler is chemically inert to most chemicals, hence purer distillate.
• No heat loss in boiler, hence saves electrical power
• High performance with low maintenance
• Has an automatic cut out facility for feed/cooling water supply (optional at extra cost).

Specifications :

Quality of Distillate :

Title	Mini Quartz Distiller
Conductivity (using raw water)	1.5 - 2.0 x 10-6S/cm
Conductivity (using treated water)	0.8 - 1.0 x 10-6S/cm
Distillate Quality	Pyrogen Free
PH at 250C	5.5 - 6.0
Distillate Temperature	50 - 60 oC

Note:

• The specifications are subject to standard test conditions.
• The results mentioned in specifications are obtained by using soft water.
• The use of treated water, as feed to boiler, is highly recommended to prevent scaling in the boiler and to obtain higher quality of distillate.