|
|
|
LI1001 - HOT AIR OVAN
| Hot Air Ovan, availabe is two types, inner chamber either of Anodized Aluminium or Stainless Steel Temperature Range from ambient to 2500C fitted with L-shape, prismatic thermometer 0-2500C fitted at front of the oven. Temp is controlled by thermostat with an accuracy of + 10C. Fitted with main switch, pilot lamp, temp, controlling knowb, perforated shelves and workable on 220 volts 50 Hz AC mains.
| | Also available in Stainless Steel and Aluminium both in different sizes. Digital Temperature control optional.
|
|
|
|
|
LI1002 - INCUBATOR
| Thermostatically controlled by Hydrollic Thermostat cabinet to 800C with a sensitivity + 10C beaded heating elements are placed in ribs at bottom and sides. Double walled insides Aluminium or Stainless steel and outside mild steel sheet painted with attractive enamel. Door has double glass viewing. Built in horizontal L shape thermometer with perforated adjustable shelves, tow pilot lamps. ON/OFF switch. To work on 220/230 Volts A.C.
| | Also available in Stainless Steel and Aluminium both in different sizes. Digital Temperature control optional.
|
|
|
|
|
LI1003 - B.O.D INCUBATOR
| Designed for low temperature incubation and routine determination of Bio-chemical oxygen demand (B.O.D). This unit is composed for triple walled chamber with a thick layer of fine glass wool to prevent loss of heat. For lower temperature work a cooking unit is provided at the lower portion of the working chamber and heating arrangement has been made in the inner chamber for work at higher temperature. The temperature various from 50C to 500C adjustable at any desired point by means of a hight precision double action thermo regulator within the variation of +0.50C. Air ciculation fan has been provided to keep the temperature uniform inside the chamber. Inner chamber is fabricated from thick aluminium anodized shelves are provided.
Toggle switch, temperature controller cum. Indicator and indicating lamps are located on the instrument for easy handling and visibility. Complete with automatic internal light, connecting cord and plug to work on 220 Volts A/C.
| | Also available in Stainless Steel and Aluminium both in different sizes. Digital Temperature control optional.
|
|
|
|
|
LI1004 - VERTICAL AUTOCLAVE
| Doubled walled, inside chamber and lit of S.S., lid tighteninig by redical arms through a steering wheel, max. pressure20 psi, with pressure guage, release valve, double safety valve, water level indicator, pedal liftig device and S.S. basket. Optionally provided with automatic pressure control switch and low water cut-off. available in various sizes. HORIZONTAL AVAILABLE.
|
|
|
|
|
LI1005 - WATER BATH
| Thermostatically controlled. Double walled. Glass window on tow opposite sides thermometer with relay, complete with stirrer.
High precision water bath. Temperature range from abient temperature to 1000C. Temperature controlled by MERCURY CONTACT THERMOMETER with a sensitivity of + 0.1 0 C. Suitable for all laboratory applications requiring constant temperature with high degree accuracy. Double walled inside Stainless steel and outside mild steel sheet. A glass window is fixed on the front. Complete with stirrer, with speed regulator. Operates pm 220/230 volts A.C.
|
|
|
|
|
LI1006 - SEROLOGICAL WATER BATH
| Serological Water Bath, temperature range from ambient temperature to 1000C. Thermostatic controled with an occuracy of + 0.50C. Double walled inside Stainless Steel and outside mild steel sheet. Bath consists of two pilot lamps,temp, control knob and ON/OFF switch. To work on 220/230 volts A.C. Supplied without stirring arrangement, without racks and thermometer.Available with rack also.
|
|
|
|
|
LI1007 - HORIZONTAL LAMINAR AIR FLOW
Specifications:
- Horizontal Laminar Flow made of stainless steel top.
- Front panel made of toughened glass in two pieces one piece fix and the other sliding upwards.
- Build with U.V. Germicide light and white light and adequate illumination.
- Fitted with hepa filter and prei filter. Hepa filter efficiency rating 99.9% down to 0.3 microns.
- Motor blower assmebly.
- Cock for gas air or vacuum line.
- Pressure differential manometer.
- Working area 48" Wx 24" Dx24" H.
| |
|
|
|
|
LI1008 - WATER BATH RECTANGULAR(SINGLE WALL)
| Made of stainless steel sheet. Complete bath and concentric rings are made of highly polished stainless steel rings. Heating elements have an automatic cutoff device when both gets dry. It doesnot have thermostat. Electronically operated 220/230V AC. Abailable in three sizes 6/12/18 holes respectively of 75mm dia.
|
|
|
|
|
LI1009 - HIGH PRECISION WATER BATH
| The bath is constructed double walled. Inside made of stainless steel and outside mild steel painted with white stove enamel. This is having a sealed glass window on two opposite sides. Temperature controlled by mercury contact thermometer from ambient to 100oC. Complete with stirrer and speed regulator. Operate on 220/230V AC. Available in different sizes.
| | Option: Electronic Digital Temperature controller cum indicator.
|
|
|
|
|
LI10010 - TISSUE FLOATING WATER BATH
| Double walled inside made of black anodised aluminum and outside made of mild steel sheet painted with white stove enamel. Thermostatic control from ambient temperature to 80oC complete with indicator. Wire and plug to work on 220/230V AC without thermometer. Available in three sizes.
| | Option: Electronic Digital Temperature controller cum indicator.
|
|
|
|
|
LI10011 - WATER BATH INCUBATOR SHAKER
| Temperature range from ambient to 100oC. Thermostatically controlled double walled inside made of stainless steel. Outside made of mild steel with stove enamel paint. Oscilating tray is raiding on ball rollers. Shaking speed ranges from 40-140 rpm. with built in prismatic thermometer. Work on 220/230V AC. Available in three sizes.
| | Option: Electronic Digital Temperature controller cum indicator.
|
|
|
|
|
LI10012 - MUFFLE FURNACE
| Outer body is made of thick mild steel sheet. Working termperature 940oC. Temperature controlled by energy regulator with indicator. Pyrometer thermo-couple. Heating element made of kanthal wire. Special high temperature alloy wounded on the outer surface of working chamber to work on 220/230V AC.
| | Option: Electronic Digital Temperature controller cum indicator.
|
|
|
|
|
LI10013 - MUFFLE FURNANCE (GROOVED TYPE)
| Outer body is made of thick mild steel sheet. Working termperature 1100oC and maximum temperature 1150o. Heating elements are fixed inside working chamber of refectory which have grooves. Heating elements are easily replaceable in any of the four sides. Available in different sizes.
| | Option: Electronic Digital Temperature controller cum indicator.
|
|
|
|
|
LI10015 -HUMIDITY CHAMBER
| The outer is made of mild steel, stoved enamel white paint Inside stainless steel. The door has glass window. The temperature can be controlled from ambient to 60oC +1oC. Built in L-shape prismatic thermometer. The humidity is controlled by humidity stat from atmospheria humidity to 90% + 3%. Available in different sizes.
| | Option: Electronic Digital Temperature controller cum indicator. Electronic Digital Humidity controller cum indicator.
|
|
|
|
| |