|
|
AGRICULTURE TESTING EQUIPMENTS |
|
|
| Seed Grader Model -
TSG-PLUS
|
|
Optional Accessories Available
Dust Collector, Air Trunk, Surge Bin,
Feeding Elevator.
Operation
Seeds/Grains are fed into a feed hopper
where they are evenly distributed by a feed roller and
drop through a controlled gate on the top sieve. Before
falling on Top Screen, grains are subjected to primary
aspiration which drains off chaff, straw, dust, deceased
grains etc. Material is then passed through two sieve
layer for separation according to width and thickness.
After passing through screens, cleaned/graded material
again passes through air sifter and aspiration where
remaining light particles are sucked off by a strong
upward draught of air. After size grading, material
passes through Indented Cylinder grader for removing
impurities based on length. Final product and impurities
are collected separately through discharge chutes.
| Technical
Specifications |
| Capacity |
: |
2 TPH (based on wheat) |
| No. of screen |
: |
2 |
| Size of each screen |
: |
112 x 143 cms WxL |
| Screen Inclination |
: |
Fixed |
| No. of Cylinders |
: |
Two |
| Size of each Cylinder |
: |
122 x 47 cms (L x Dia) |
| Cylinder Inclination |
: |
Fixed |
Rotational speed of
Cylinders |
: |
Variable |
Screen Perforation
Cleaning Device |
|
| Top |
: |
Beaters |
| Bottom |
: |
Nylon Brushes |
| No. of aspiration |
: |
Two |
| Fan Capacity |
: |
6500 CFM at 75 mm WGSP |
| Fan Speed |
: |
980 RPM |
| Electric Motor |
: |
7.5 HP + 2 HP, 440V, 3
Phase |
|  | |
|
Seed Grader Model - MASTER
|
Air Chamber, Sieve Deck assembly and spouts are self
cleaning type. Belt guard provided. Easily changeable
sieves with large surfaces screeing area. Sieve
reciprocating provided by means of eccentric and
connecting rods.
Optional Accessories Available
Air Trunk.
Operation
Seeds/Grains are fed into a low level feed hopper
where they are sucked up by double aspirator fans and
drop on the top sieve. Before falling on Top Screen,
grains are subjected to primary aspiration which drains
off chaff, straw, dust, deceased grains etc. Material is
then passed through two sieve layer for separation
according to width and thickness. After passing through
screens, cleaned/graded material again passes through
air sifter and aspiration where remaining light
particles are sucked off by a strong upward draught of
air. Final product and impurities are collected
separately through discharge chutes.
| Technical
Specifications |
| Capacity |
: |
1.5-2TPH (based on wheat) |
| No. of screen |
: |
2 |
| Size of each screen |
: |
112 x 143 cms W x L |
| Screen Inclination |
: |
Fixed |
Screen Perforation
Cleaning Device |
|
| Top |
: |
Beaters |
| Middle & Bottom |
: |
Nylon Brushes |
| No. of aspiration |
: |
Two |
| Fan Capacity |
: |
3700 CFM at 75 mm WGSP each
fan |
| Fan Speed |
: |
1080/1440 RPM |
| Electric Motor |
: |
7.5 HP, 3 Phase, 440 V |
O.A.Size
L x W x H |
: |
306 x 250 x 247 cms
|
|
| | |
|
| Seed Grader Model - SUPER
|
|
Salient Features
Robust machine of all steel construction. Dynamically
balanced aspirator fan. Low level feed hopper equipped
with feed control gate, hence no need of feeding
elevator. Specially designed Nylon brushes to check
sieve perforation clogging. Stepless variable air
controls. Air Chamber, Sieve Deck assembly and spouts
are self cleaning type. Belt guard provided. Easily
changeable sieves. Sieve reciprocating provided by means
of eccentric and connecting rods.
Optional Accessories Available
Dust Collector, Air Trunk. Note : This grader does
not need a feeding elevator as the feeding hopper is at
low level and feeding of material is through pneumatic,
suction.
Operation
Seeds/Grains are fed into a low level feed hopper
where they are sucked up by aspirator fan and drop on
the top sieve. Before falling on Top Screen, grains are
subjected to primary aspiration which drains off chaff,
straw, dust, deceased grains etc. Material is then
passed through three sieve layer for separation
according to width and thickness. After passing through
screens, cleaned/graded material again passes through
air sifter and aspiration where remaining light
particles are sucked off by a strong upward draught of
air. Final product second grade and impurities are
collected separately through discharge chutes.
| Technical
Specifications |
| Capacity |
: |
1-1.2 TPH (based on wheat) or 8-10 bags / hr
of corriander (Dhania) |
| No. of screen |
: |
3 |
| Size of each screen |
: |
|
| Top |
: |
90 x 100 cms W x L |
| Middle & Bottom |
: |
89 x 180 cms W x L |
| Screen Inclination |
: |
Fixed |
Screen Perforation
Cleaning Device |
|
| Top |
: |
Beaters |
| Bottom |
: |
Nylon Brushes |
| No. of aspiration |
: |
Two |
| Fan Capacity |
: |
3700 CFM at 75 mm WGSP each fan |
| Fan Speed |
: |
1080/1440 RPM |
| Electric Motor |
: |
5 HP, 3 Phase, 440 V |
O.A.Size
L x W x H |
: |
306 x 250 x 247 cms |
|  | |
|
| Seed Grader Model- VENUS
|
|
Salient Features
Robust machine of all steel construction. Dynamically
balanced aspirator fan. Low level feed hopper equipped
with feed roller and feed control gate. Specially
designed Nylon brushes to check sieve perforation
clogging. Stepless variable air controls. Air Chamber,
Sieve Deck assembly and spouts are self cleaning type.
Belt guard provided. Easily changeable sieves. Sieve
reciprocating provided by means of eccentric and
connecting rods. The unit is supplied complete with
electric motor, starter and switch.
Optional Accessories Available
Dust Collector, Air Trunk. Note : This grader does
not need a feeding elevator as the feeding hopper is at
low level and feeding of material is through pneumatic,
suction.
Operation
Seeds/Grains are fed into a low level feed hopper
where they are sucked up by aspirator fan and drop on
the top sieve. Before falling on Top Screen, grains are
subjected to primary aspiration which drains off chaff,
straw, dust, deceased grains etc. Material is then
passed through three sieve layer for separation
according to width and thickness. After passing through
screens, cleaned/graded material again passes through
air sifter and aspiration where remaining light
particles are sucked off by a strong upward draught of
air. Final product second grade and impurities are
collected separately through discharge chutes Note :
Capacities are based only on corriander and it various
for crop to crop.
Technical Specifications (Positive Pressure
Type)
| Capacity |
1 8 - 24 bags/hr of corriander (Dhania) |
| No. of screen |
3 |
Size of each screens
Meter/Minute |
112 x143 cms |
| Screen Perforation cleaning Device
Top |
Beaters |
| Middle & Bottom |
Nylon brushes |
| Screen Inclination |
Fixed |
| No. of aspiration |
Two |
| Fan Capacity |
7000 CFM at 75mm WGSP |
| Fan Speed |
980 RPM & 1100 RPM |
| Electric Motor |
7.5 HP, 3 Phase, 440V |
|  | |
|
| Seed Grader Model- Super II
|
|
Salient Features
Robust machine of all steel construction. Dynamically
balanced aspirator fan. Low level feed hopper equipped
with feed roller and feed control gate. Specially
designed Nylon brushes to check sieve perforation
clogging. Stepless variable air controls. Air Chamber,
Sieve Deck assembly and spouts are self cleaning type.
Belt guard provided. Easily changeable sieves. Sieve
reciprocating provided by means of eccentric and
connecting rods.
Optional Accessories Available
Dust Collector, Air Trunk. Note : This grader does
not need a feeding elevator as the feeding hopper is at
low level and feeding of material is through pneumatic,
suction.
Operation
Seeds/Grains are fed into a low level feed hopper
where they are sucked up by aspirator fan and drop on
the top sieve. Before falling on Top Screen, grains are
subjected to primary aspiration which drains off chaff,
straw, dust, deceased grains etc. Material is then
passed through two sieve layer for separation according
to width and thickness. After passing through screens,
cleaned/graded material again passes through air sifter
and aspiration where remaining light particles are
sucked off by a strong upward draught of air. Final
product second grade and impurities are collected
separately through discharge chutes
Technical Specifications (Positive Pressure
Type)
| Capacity |
1.2 TPH (based on wheat) |
| No. of screen |
2 |
Size of each screens
Meter/Minute |
112 x143 cms |
| Top |
90x100 cms WxL |
| Bottom |
90 x 180 cms WxL |
| Screen Perforation cleaning Device
Top |
Beaters |
| Middle & Bottom |
Nylon brushes |
| Screen Inclination |
Fixed |
| No. of aspiration |
Two |
| Fan Capacity |
4500 CFM at 75mm WGSP |
| Fan Speed |
900 RPM |
| Electric Motor |
5 HP, 3 Phase, 440V |
| O.A. Size |
356x175x285 cms LxWxH |
|
| |
|
| Seed Grader Model - DELUX
|
|
Salient Features Robust machine of all
steel construction. Dynamically balanced aspirator fan.
Low level feed hopper equipped with feed control gate.
Specially designed Nylon brushes to check sieve
perforation clogging. Stepless variable air controls.
Air Chamber, Sieve Deck assembly and spouts are self
cleaning type. Belt guard provided. Easily changeable
sieves. Sieve reciprocating provided by means of
eccentric and connecting rods. Optional Accessories
Available Dust Collector, Air Trunk. Note : This grader
does not need a feeding elevator as the feeding hopper
is at low level and feeding of material is through
pneumatic, suction. Operation Seeds/Grains are fed into
a low level feed hopper where they are sucked up by an
aspirator fan and drop on the top sieve. Before falling
on Top Screen, grains are subjected to primary
aspiration which drains off chaff, straw, dust, deceased
grains etc. Material is then passed through two sieve
layer for separation according to width and thickness.
After passing through screens, cleaned/graded material
again passes through air sifter and aspiration where
remaining light particles are sucked off by a strong
upward draught of air. Final product and impurities are
collected separately through discharge chutes.
|
Technical
Specifications |
| Capacity |
: |
1 TPH (based on wheat) |
| No. of screen |
: |
2 |
| Size of each screen |
: |
|
| Top |
: |
66 x 74.5 cms W x L |
| Middle & Bottom |
: |
66 x 130 cms W x L |
| Screen Inclination |
: |
Fixed |
Screen Perforation
Cleaning Device |
|
| Top |
: |
Beaters |
| Bottom |
: |
Nylon Brush |
| No. of aspiration |
: |
Two |
| Fan Capacity |
: |
4500 CFM at 75mm WGSP |
| Fan Speed |
: |
980 RPM |
| Electric Motor |
: |
5 HP, 3 Phase, 440V |
O.A.Size
L x W x H |
: |
316 x 146 x 256 cms
|
|  | |
|
| Seed Grader Model - CLASSIC
|
|
Salient Features
All steel construction. Low level
feeding hopper, hence no need of feeding elevator.
Aspirator fan is dynamically balanced. Machine is
equipped with built-in cyclone dust collectors. Air
aspiration is provided with stepless variable air
control arrangement for removal of lighter impurities
like dust, chaff, husk, diseased seeds, small weed seed
etc. Air chamber is self cleaning type. Clean seed
discharge spout is in the centre of the machine. Sieve
deck assembly is self cleaning type to avoid admixtures
during cleaning. All spouts are fitted with bag holding
clamps at bagging height and are self cleaning type. All
shafts are made of high grade material and are mounted
on pillow/flange type self aligned ball bearings with
built-in casing. The machine is pre-wired from electric
motors to the control panel to a single connection for
the incoming power supply. The unit is supplied complete
in all respect including electric motors, one set of
screen (for any particular crop seed), built-in cyclone
dust collectors.
| Technical
Specifications |
| Capacity |
: |
400 Kg/hr (Based on wheat) |
| No. of screen |
: |
Three |
| No. of Scalping |
: |
One |
| No. of Grading |
: |
Two |
| Size of each screen |
: |
65 x 75 cms (W x L) |
| Screen Inclination |
: |
Fixed |
Screen Perforation
Cleaning Device |
|
| Top |
: |
Beaters |
| Middle |
: |
Rubber Balls |
| Bottom |
: |
Rubber Balls |
| Oscillating speed of Screen deck |
: |
Variable |
| No. of aspiration |
: |
Two |
| Electric Drive |
: |
Electric motor of 3 HP for
aspirator fan, 0.75 HP for discharge spouts for
operation on 220 V, Three phase, 50 c/s. A.C.
supply. |
|  | |
|
| Seed Grader Model - PRIMA
|
|
Salient Features
All steel construction. Feeding hopper
is provided with a feed control gate to regulate the
feeding rate. Blower fan is dynamically balanced. Both
the air separations are independently controlled in a
wide range to achieve the desired grading quality.
Cyclone dust collector is a built-in unit with the
machine. Air Chamber, spouts and Sieve Deck assembly are
self cleaning type to avoid admixtures during cleaning
and grading.
| Technical
Specifications |
| Capacity |
: |
250Kg/hr based on wheat |
| No. of screens |
: |
Three |
| No. of Scalping |
: |
One |
| No. of Grading |
: |
Two |
| Size of each screen |
: |
70 x 50 cms (W x L) |
| Total screening area |
: |
1.0 (M2) |
| Screen Inclination |
: |
Fixed |
| Screen Perforation |
| Cleaning Device |
: |
Rubber Balls |
| Oscillating speed of |
| Screen deck |
: |
Variable in wide range |
| No. of air separation |
: |
Two |
| Electric Drive |
| Blower |
: |
2 HP |
| Sieve Deck |
: |
0.5 HP |
| Spout |
: |
0.25 HP sutable for 220 V 50 HZ single phase
Ae |
|  |
|
| Seed Grader Model - ULTRA
|
|
Salient Features
The machine is mounted on a table
and whole unit is portable. Feeding hopper is
provided with a feed control gate to regulate the
feeding rate. Specially designed rubber balls have
been provided to check the clogging of screens
perforations. Blower fan is dynamically balanced.
Both the air separations are independently
controlled in a wide range to achieve the desired
grading quality. The machine is equipped with a
unique feature which is used for thorough cleaning
of the whole machine with the help of in-built air
blast system to avoid any chance of varietal as
well as inter crop mixing. Cyclone dust collector
is a built-in unit with the machine.
Optional
Accessories Available
Electromagnetic Vibratory Feeder.
|
|
Technical
Specifications |
| Capacity |
: |
150 Kg/Hr (based on
wheat) |
| No. of screens |
: |
Three |
| No. of Scalping |
: |
Two |
| No. of Grading |
: |
One |
| Size of each screen |
|
|
| Top |
: |
25 x 25 cms (W x L) |
| Middle & Bottom |
: |
25 x 50 cms (W x L) |
|
| Total screening area |
: |
0.31 M2 |
| Screen Inclination |
: |
Fixed |
| Screen Perforation |
| Cleaning Device |
: |
Rubber Balls |
| Oscillating speed of |
| Screen deck |
: |
Variable |
| No. of air aspiration |
: |
Primary air separation is by suction
air |
|
|
and secondary air separation |
|
|
by air blast. |
| Electric Motor for |
| Blower |
: |
1 HP for operation on 220 Volt single |
|
|
phase 50 c/s AC supply. |
| Sieve Deck
| : |
0.50 HP stepless variable speed |
|
|
motor for operation on 220 V single |
|
|
phase 50 cycle AC supply. |
| Feeding |
: |
Manually |
|  |
|
| Seed Grader
Model - JUNIOR
|
|
Salient
Features
Built in dust collector and fan
provide a large air volume for removing dust and
lighter impurities. Sieve perforations are
cleaned by means of automatic vibrator
unit/Beaters. Built-in Indented cylinder grader
for removing cut grains, short grains from long
ones. All grading operations are clearly visible
when the machine is in operation. Machine is
self emptying type within a very short period of
time.
| Technical
Specifications |
| Capacity |
: |
100 Kg/hr (Based on Wheat) |
| No. of screen |
: |
Two |
| Size of each screen |
: |
31 x 59 cm W x L |
| Screen Inclination |
: |
Fixed |
| Size of Indented Cylinder |
: |
38 x 32.5 cm (Dia x L) |
| No. of aspiration |
: |
One |
| Oscillation speed of sieve
deck |
: |
Fixed |
| Electric Motor |
: |
2 HP 440V |
O.A. Size (cm)
(L x W x H) |
: |
265 x 62 x 172 |
| Feeding Level |
: |
154 cms from ground level.
Elevator is not
required |
|  | |
|
|
| SPECIFIC GRAVITY SEPARATOR
MODEL(S)
Specific Gravity Separators G-2,
G-4
|
|
Salient
Features
Rectangular Deck for greater
capacity and accuracy, quickly & easily
interchangeable type. Fans are dynamically
balanced with individually adjustable air
control for each fan for precise control of air
flow. All the fans are mounted on one common
shaft. Variable oscillation speed of deck in
wide range. Variable inclination of deck
sidewise and lengthwise in wide range. Air
Chamber, Sieve Deck assembly and spouts are self
cleaning type. Belt guard provided. Sieve
reciprocating provided by means of eccentric and
connecting rods. Heavy duty and rebust
structural frame to absorb the vibrations. Seed
Collecting spouts are fitted with bag holding
clamps. Eccentrics are counter balanced giving
smooth oscillation action to the deck. Big
Feeding Hopper with adjustable height and
variable feeding rate through controlled gate.
Built in air filters can be easily removed for
easy access to the moving parts. Screw type
arrangement for each fan for controlling the
quantity of air.
Optional Accessories
Available
1. Additional Deck meant for
small seeds, like vegetable seeds, grass seeds,
flower seeds etc.
2. SURGE BIN/BUFFER HOPPER
3. Vibratory feeder for
non-free flowing grains.
4. Canopy dust system including
hood to cover part of the deck, connecting duct,
cyclone dust collector with intergral fan.
5. V.B. Elevator (to feed
specific gravity separator).
Technical
Specifications
|
G-2 |
G-4 |
| Cap. (based on Wheat) |
1.5 to 2 TPH |
3 to 4 TPH |
| No. of fans |
3 |
5 |
| Size of Deck (cms) W x L |
80 x 159 |
104 x 234 |
| Type of Deck |
Rectangular Type |
Rectangular Type |
| Electric Drive |
5 HP for operation on 440 V,
3 Ph., 50
cycle AC supply |
10 HP for operation on 440 V,
3 Ph., 50
cycle AC supply |
Overall size (cms) L x W x H
Approx. |
204 x 135 x 125 |
280 x 168 x 148 |
| Net Weight (Kg.) Approx. |
700 |
1070 |
| Packed Weight (Kg.) Approx. |
1050 |
1720 |
|  | |
|
| Specific
Gravity Separator GT
|
|
Salient
Features
Quickly and easily
interchangeable type deck. Fan is dynamically
balanced, with adjustable air control for
precise control of air flow. Variable
oscillation speed of deck in wide range. Deck
assembly is rested on four specially designed
levers with bushings for smooth and trouble free
operation. Variable inclination of deck sidewise
and lengthwise in wide range. Eccentric is
counter balanced giving smooth oscillation
action to the deck. Miniature feeding hopper
with adjustable height and variable feeding rate
through controlled gate. Built in air filter can
be easily removed for easy access to the moving
parts. The machine is pre-wired from electric
motor to starter to a single connection for in
coming power supply.
Optional Accessories
Available
Extra Deck, Buffer Hopper,
V.B.Elevator.
Technical
Specifications
| Capacity |
: |
100 Kg/Hr (based on Wheat) and depending
upon the grading quality to be
achieved. |
| No. of Fans |
: |
One |
| Electric Motor |
: |
1 HP |
| Fan Deck |
: |
0.5HP Suitable for 220V 50 HZ
AC |
|  | |
|
|
INDENTED CYLINDER SEED GRADER
MODEL(S)
Indented Cylinder Seed Graders IC-1,
IC-2, IC-3, IC-4, IC-5, IC-6
|
Salient Features
All metal construction. Quick
interchangeable type indent segments. Noted for
high precision grading capability. Long service
life and easy maintenance. Variable rotational
speed of cylinder.
Operation
The material enters the machine
through the feeding device directly into the
centre of the rotating cylinder. The shorter
than required size particles lodge in the
indents and are lifted by the cylinder until
they fall out under gravitational force into the
internal trough. Large particles not deposited
in the indents are retained on the inside
surface of the cylinder. Due to rotating speed
and inclination of cylinder, long grains are
discharged out and rejects comprising of cut
grains, small round grains and other crop seeds
etc. are discharged out seperately via auger or
vibrating device fitted with trough.
1. Inlet Feed
2. Rotating Cylinder Grader
3. Internal Collecting Trough
4. Auger
5. Reject Outlet
6. Good Seed Outlet
| Model |
Capacity
TPH
Wheat Basis |
No. of
Cylinders |
Cylinder
Size
L x Dia mm |
HP |
| IC-1 |
1 |
One |
1255 x 475 |
1 |
| IC-2 |
2 |
Two |
1255 x 475 |
2 |
| IC-3 |
3 |
Two |
1832 x 600 |
2 |
| IC-4 |
4 |
Two |
2408 x 600 |
3 |
| IC-5 |
5 |
Two |
2985 x 700 |
3 |
| IC-6 |
6 |
Two |
3262 x 700 |
4 |
|  | | |
| | |
